Belkin BITRONICS P73046 - Manual (Page 7)

3
DIP switch settings (located underneath switch):
SW1: Reset Switch
To reset, OFF →ON→OFF
SW2 and SW3: TimeOut Setting
TimeOut is the amount of time the switch remains locked on a PC port after
data transfer. Use a longer TimeOut when connecting to scanners, mass
storage devices and for large print jobs.
Product Detail
Device activity LEDs
Connector to Device A Connector to Device B
Connector to PC2
PC activity LEDs
Recommended
Printer button
Computer button
DC power jack
(side)
Connector to PC3
ON DIP
1 2 3 4
ON is UP. SW4 is not used.
SW2
ON ON 5 seconds
ON OFF 10 seconds
OFF ON 20 seconds
OFF OFF 40 seconds
SW3 TimeOut
En
Connector
to PC1
Connector
to PC4
P73046_F1U128uKIT univ_man.qxd 4/28/00 2:12 PM Page 3