Belkin BITRONICS P73046 - Manual (Page 20)

16
Windows ® 95 / 98 and NT ® (continued)
8. Change printer port from LPT1 to AutoSwitch port:
If one or both of the devices being shared is a printer, you must follow the
procedure below to reconfigure the port connected to the printer. If both
devices are printers, then this must be done for both printers. If neither
device is a printer, then you can skip this step.
8.1. Click on Start, select Settings, and double-click on Printers.
8.2. Right-click on the printer installed on the Bitronics switch, and click
on Properties:
P73046_F1U128uKIT univ_man.qxd 4/28/00 2:12 PM Page 16