Belkin BITRONICS P73046 - Manual (Page 24)

20
Windows ® 95 / 98 and NT ® (continued)
All you have to do is pick your printer, and the software does everything else.
But remember, ALL THE SETTINGS MUST BE CORRECT, otherwise you may
print garbage out of the wrong printer!
Below, the user has chosen the LaserJet ™ printer. Here, this printer is
connected to Port A of the AutoSwitch. When the print job is sent, the
Bitronics software tells the Bitronics switch to switch to Port A, then lets the
print job go through to the LaserJet
™ .
P73046_F1U128uKIT univ_man.qxd 4/28/00 2:12 PM Page 20