BT PARAGON 500 User Manual

Page 30

BT Paragon 500 – Edition 4 – 10.05.04 – 5840

Record a memo

You can record a message for other users. It is played
back just like a normal message.

1. Press

then scroll

ANSWERING MACHINE SET-UP

and press

. Display shows

MEMO RECORDING

2. Press and hold

. After the beep, speak your message

clearly.

3. Release

to end recording. The play light will flash to

indicate a message has been left.

Ring delay

Answer delay sets the number of times your BT Paragon
500 will ring before the answering machine picks up your
call. The default setting is 4 rings. You can change this to
2-9 rings or time saver.

1. Press

then scroll

ANSWERING MACHINE SET-UP

and press

2. Scroll

RING DELAY

and press

. The current

setting is shown. Press

to scroll to the setting

you want

2-9

rings or

TIME/SAVE

3. Press

to select the option displayed.

ᮤ

Answering machine

Memos can be up to 3 minutes
long. Memos are stored in the
same way as incoming messages.

If you record your message via the
built in microphone, make sure you
are facing the BT Paragon 500.

Time Saver

Time Saver can save you the cost
of a call when you want to ring in
to find out if you have new
messages.

If your answering machine
answers after 2 rings, you have
new messages. If you have no new
messages it will answer after 5 rings.
So should you hear a third ring,
you can hang up before you are
connected, saving you the cost of
a call.

5840 Paragon 500 SMS UG [3] 10/5/04 5:14 pm Page 30