Blaupunkt IVMR-7001 - Manual (Page 7)

22
USING FOR THE FIRST TIME
Changing the light bulb
To fit a new bulb, proceed as follows:
➮
Set the light switch to “OFF”.
➮
Push back the bulb cover and open
it (see diagram below).
➮
Remove the old bulb and dispose
of it.
➮
Fit a new bulb.
➮
Close the bulb cover.
Light bulb specifications
Diameter: 8 mm
Length: 29 mm
Voltage: 12 V direct current,
5 W
Type: Stanley A3022C or a
type with the same
specifications
Wiring
Bulb for the main unit
Red = Electrical supply (12 V)
White = Internal lighting system
Black = Ground
Caution:
●
The screws have different sizes.
Make sure that you insert the
screws in the correct positions.
●
Make sure that the screws are
screwed tight to ensure a good
ground connection.
Monitor connection
Screws
Light cable for the main unit
Connecting
cable
System cable
Connecting cable
Light cable for the main unit
Bulb cover
Light bulb