Blaupunkt IVMR-7001 - Manual (Page 12)

DANSK
27
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
OPERATION
●
FM CHAN:
Use this option to select the FM chan-
nel. This channel is set by default to
“OFF”.
The specifications are as follows:
TV system FM frequency (MHz) in
steps of 0.2 MHz
USA OFF / 88.1 - 91.9
JAPAN OFF / 77.1 - 80.9
PALB/G OFF / 88.1 - 91.9
PALD/K OFF / 88.1 - 91.9
PALA/I OFF / 88.1 - 91.9
●
AUTO PROG (Automatic program-
ming):
Please refer to the “AUTO PROG” func-
tion in the section describing the remote
control.
●
AV OUT:
Select this option to switch between the
AV output modes “Constant” and “Vari-
able”.
●
ZOOM :
This mode is set by default to “Full”. You
can use the and
buttons to switch
between the following settings:
Full = for displaying a 4:3 signal on a
16:9 screen format
ZOOM1 = Picture height expansion,
zoom factor = 4/3
WIDTH1 = Picture height expansion and
different picture width change
Normal = Side ratio of 4:3
ZOOM2 = Zoom factor = 8/7, picture
height expansion
WIDTH = Different picture width change
WIDTH2 = Picture height expansion and
different picture width change
ZOOM3 = vertical expansion, zoom fac-
tor = 8/7
●
SPEAKER:
Select the “SPEAKER” option and then
use the and
buttons to switch the
monitor loudspeaker on/off.
●
REVOLVE:
This function and the and buttons
allow you to reverse the picture (i.e.
right-to-left reversed).
●
RESET PICTURE:
Select the “RESET PICTURE” option to
reset the adjusted parameters back to
their factory defaults.
●
MAIN MENU:
If you are in the submenu, you can re-
turn to the main menu by selecting this
option.