Ir-headphones, Specifications – Blaupunkt IVMR-7001 User Manual
Page 14

DANSK
29
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
4. For stereo audio, move the switch
to the stereo position. Move the
switch to the mono position for
mono audio/video devices.
IR-HEADPHONES
5. Reception position
The headphones/receiver receive
audio signals within certain ranges
from any direction and directly.
You will enjoy the best reception
if you stay within a distance of
5 metres from the transmitter.
Specifications
Surround transmitter:
Power consumption
Effective angle
Weight
Stereo headphones:
Type
Transducer system
Impedance
Frequency response
Sound intensity level
Distortion
Infrared wavelength
Modulation
Carrier frequency
Power supply
Battery operating time
(at 10 mV output power)
Weight
Range
12 V DC 200 mA
120 degrees
approx. 55 g
dynamic, open
40 mm Mylar membrane
32 ohm +/- 6.4 ohm
20 Hz – 23 KHz
98 dB/rated deviation
1 % total harmonic distortion
at rated deviation
845 mm +/- 5 mm
high frequency modulation
right 2.8 MHz, left 2.3 MHz
2 DCV (1.5 V AAA x 2)
approx. 48 hours
approx. 170 g (without batteries)
approx. 7 metres