Bose SA-2 - Manual (Page 23)

21
Setting Up Your Lifestyle ® Stereo Amplifier
Engl
is
h
Powering-up your system
CAUTION: DO NOT plug the AC power cord into an AC (mains) outlet until all other connections
are complete.
1. Using the power cord included with your Lifestyle ® stereo amplifier, firmly insert the small
connector on one end of the power cord into the AC power connector on the rear panel
of the amplifier (Figure 17).
2. Connect the power cord of the Lifestyle ® stereo amplifier and your Lifestyle ® music
system to an AC (mains) outlet. The status LED tells you the operational status of the
amplifier.
3. Select a music source with your Personal ® music center or your new remote control and
adjust the volume to your liking.
Figure 17
Connecting the power cord
ROOM
CODE
Rear panel of Lifestyle ® stereo amplifier
AC power cord
LED activity Meaning
Constant slow blinking
(1 sec. on, 3 sec. off) The amplifier is OFF (standby).
Continuously lit The amplifier is ON and ready to produce sound.
Blinking quickly The amplifier is ON and receiving data commands
from the media center through the Bose
® link port.
Constant slow blinking
(1 sec. on, 5 sec. off) The amplifier is set up as a supplemental amplifier
and it is OFF.
Lit but rapidly flickering The amplifier is set up as a supplemental amplifier
and it is ON.
Status LED