BenQ MP522 User Manual
Page 45
Operation
45
FUNCTION
(default setting/
value)
DESCRIPTION
(default setting/value)
Standby D-
Sub Output
(Off)
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the D-SUB IN and D-SUB OUT
sockets are correctly connected to devices. See
for how to make the connection.
Enabling this function slightly increases the standby power
consumption.
Lamp
Settings
Lamp mode (Normal)
"Setting Lamp mode as Economic" on page 48
for details.
Reset lamp timer
"Resetting the lamp timer" on page 52
for details.
Equivalent lamp hour
S
"Getting to know the lamp hour" on page 48
for details on how
the total lamp hour is calculated.
Security
Settings
Change password
You will be asked to enter the current password before changing to a
new one.
Power on lock (Off)
"Utilizing the password function" on page 26
for details.
Baud Rate
(115200)
Selects a baud rate that is identical with your computer’s so that you
can connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern
(Off)
Selecting On enables the function and the projector displays the grid
test pattern. It helps you adjust the image size and focus and check that
the projected image is free from distortion.
Closed
Caption
Closed Caption Enable (Off)
Activates the function by selecting On when the selected input signal
carries closed captions.
•
Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Caption Version (CC1)
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude
Mode, Security Settings, Baud Rate.
5.
SYSTEM SETUP: Advanced
menu