Remote control – BenQ MP522 User Manual
Page 11
Introduction
11
Remote control
1.
Power
Toggles the projector between standby
mode and on. See
and
for details.
2.
Freeze
Freezes the projected image. See
for details.
3.
Left/
Starts the FAQ function. See
for details.
4.
BLANK
Used to hide the screen picture. See
for details.
5.
Digital Zoom keys (+, -)
Magnifies or reduces the projected picture
size. See
for details.
6.
Menu/Exit
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
See
for
details.
7.
Keystone/Arrow keys (
/ Up,
/
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 30
details.
8.
AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 29
details.
9.
Right/
for details.
When the On-Screen Display (OSD)
menu is activated, the #3, #7 and #9 keys
are used as directional arrows to select the
desired menu items and to make
adjustments. See
for details.
10.
SOURCE
Displays the source selection bar. See
"Switching input signal" on page 28
for
details.
11.
Mode/Enter
Depending upon which input signal is
selected, selects an available picture setup
mode. See
for details.
Enacts the selected On-Screen Display
(OSD) menu item.
12.
Timer On
Activates or displays an on-screen timer
based on your own timer setting. See
"Setting the presentation timer" on page
36
for details.
13.
Timer Setup
Enters presentation timer setting directly.
See
"Setting the presentation timer" on
for details.
I
I