BenQ MP522 User Manual
Page 44
Operation
44
FUNCTION
(default setting/
value)
DESCRIPTION
(default setting/value)
Projector
Position
(Front Table)
The projector can be installed on a ceiling or behind a screen, or with
one or more mirrors. See
"Choosing a location" on page 13
for details.
Auto Power
Off
(Disable)
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
for details.
Blank Timer
(Disable)
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
for details.
Panel Key
Lock
(Off)
Disables or enables all panel key functions except
Power on the
projector and keys on the remote control. See
for details.
Sleep Timer
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Splash
Screen
(BenQ logo)
Allows you to select which logo screen will display during projector
start-up. Three options are available: BenQ logo, Black screen, or Blue
screen.
Quick
Cooling
(On)
Selecting On enables the function and the projector cooling time will
be shortened to a few seconds.
If you attempt to restart the projector right after the quick
cooling process, it may not be turned on successfully and will
rerun its cooling fans.
High Altitude
Mode
(Off)
A mode for operation in high altitude areas. See
altitude environment" on page 38
for details.
Menu
Settings
Menu display time (15 sec)
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position (Center)
Sets the On-Screen Display (OSD) menu position.
4. SYSTEM SE
TUP:
Basic
menu
I
I
5. SYSTEM
SETUP:
Adva
nce
d
menu