Briggs & Stratton 1694919 - Manual (Page 9)

7
Maintenance
Schedule For Normal Care
General Lubrication
Lubricate the snow blade as shown in Figure 2. Where
an oil can is shown use 30 weight oil. Where a grease
gun is shown, use lithium grease. Lubricate the following
areas:
• Grease the blade pivot.
• Oil the blade lock pawl
• Apply grease to the plastic wear surface above the
bell crank and to the bell crank.
General Lubrication
Figure 2. Lubrication Points
WARNING
To avoid serious injury, perform maintenance on
the unit only when the engine is stopped and all
moving parts have stopped. Always remove the
ignition key before beginning maintenance or
adjustments to prevent accidental starting of the
engine.
Care Required Schedule
Clean snow and ice from After each use
the snow blade.
Lubricate snow blade.
Every 10 hours or at
least once a year.