BT Relate SMS - Manual (Page 26)

At the base:-
Press and hold down the PAGE button
on the base until it starts to flash.
On the handset:-
Use the UP button to scroll to Base.
Press the OK button to confirm.
The display will show Register.
Press the OK button to confirm.
Use the UP or DOWN button to scroll
to Custom.
Press the OK button to confirm.
Use the UP or DOWN button to scroll
to the required base number.
Press the OK button to confirm.
At this stage if you require you can edit
the base name.
Press the OK button to confirm.
Enter the System Code using the
keypad.
Press the OK button to confirm.
To register a handset to a base
station (if you have changed the
System Code from 0000)
▲
▲
▼
▲
▼
C OK
C OK
C OK
C OK
C OK
C OK
CODE
25
On-Air 2100 SMS user guide ~ Edition 3 ~ 29th July ’02 ~ 4641
If you purchase new handsets to use with your
current BT On-Air 2100 SMS, they will not be
pre-registered to a base station. You will need to
do this before you can use them.
At the base:-
Press and hold down the PAGE button
on the base until it starts to flash.
On the handset:-
Use the UP button to scroll to Base.
Press the OK button to confirm.
The display will show Register.
Press the OK button to confirm.
Use the UP or DOWN button to scroll
to Automatic.
Press the OK button to confirm.
The display will show
Searching for base.
Registering additional handsets
To register a handset to a base
station (if you have not changed the
System Code from 0000)
▲
C OK
C OK
Note
Please note that when you register a
handset in the following way any previous
base that the handset has been registered to
will be deleted. To prevent the deletion of
other registered bases please register using
the process opposite even if you have not
changed the system code from 0000.
If you have registered your handset to more
than one base you can prioritise which base
you want your handset to use. For instructions
on base station priority, see page 22.
After a few seconds the handset will be
registered and display:
▲
▼
C OK
Base 1
Handset 2