Buffalo Technology WLI-TX4-AG300N - Manual (Page 20)

20
Once you've set the SSID, Encryption Mode, and Encryption Key, the Ethernet Converter
will be able to connect to your other wireless devices. Disconnect the Ethernet Converter
from the wired network connection and move it to its desired location.
You may connect four wired Ethernet devices to the Ethernet Converter's LAN ports.
Connected devices may include XBoxes, PS2s, Home Theater equipment, switches, hubs,
or another computer system. No special drivers are required on the connected Ethernet
devices. Plug the AC Adapter into a nearby power outlet and connect it to the Ethernet
Converter. Power cycle any devices that are connected to the Ethernet Converter.
If you set a static IP address on your computer in order to connect to the Ethernet
Converter, then restore the computer's IP settings to obtain an IP Address automatically.
Congratulations! Your Ethernet Converter is set up and ready to use.
Turn to the next page for Advanced Settings.