English – Vitek VT-1456 User Manual
Page 5

4
Hand Blender Set
Description
Hand Blender
(A) Motor Part
(B) On / Off switch
(L) Variable Speed
(C) Blender shaft with Blade
(D) Breaker
(K) Wall Mount
Whisk Attachment
(E) Whisk gear box
(F) Whisk
Mini-Chopper attachment
(G) Chopper gear box
(H) Chopper blade
(I) Chopper bowl
(J) Anti-slip base
Caution
Please read the use Instructions carefully and
completely before using the appliance.
The blades are very sharp!
Always unplug the appliance before assem-
bling, disassembling, cleaning or storing.
The appliance must be kept out of reach of
children.
Do not hold the motor part (A) nor the whisk
gear box (E) under running water, nor
immerse them in water.
The appliances meet applicable safety stan-
dards. Repairs or the replacement of the
mains cord must only be done by authorized
service personnel. Faulty, unqualified repair
work may cause considerable hazards to the
user.
Before plugging into a socket, check whether
your voltage corresponds to the voltage
printed on the bottom of the appliance.
The appliance is constructed to process nor-
mal household quantities.
Neither the beaker (D), nor the mini-chopper
bow (I) are microwave-proof.
Important Information
This appliance is not for professional use. You
should follow the requested breaks. Failure to
follow this instruction carefully may result in
damage to the motor. Please refer to the rating
label for the maximum continuous usage time
(KB/MAX 1 min or 1 is the maximum usage
time). The breaks should last at least 5 minutes.
How to operate your hand blender
The hand blender is perfectly suited for prepar-
ing dips, sauces, soups, mayonnaise and baby
food as well for mixing drinks and milkshakes.
Setting the variable speed
When activating variable speed control (L), the
processing speed corresponds to the setting of
speed regulated knob. The Max the setting, the
faster the chopping results.
1. Insert the motor part (A) into the blender
shaft (C) until it locks.
2. After set the variable speed control of motor
part (A), Introduce the hand blender in the
vessel, then press the on/off switch (B) to
operate it.
You can operate the hand blender in the measur-
ing beaker (D), and just as well in any other ves-
sel. Even you can blend directly in the saucepan
while cooking.
How to operate your whisk
Use the whisk only for whipping cream, beating
egg whites and mixing sponges and mixing
sponges and ready-mix desserts.
1. Insert the whisk (F) into the whisk gear box
(E), and then insert the motor part (A) into the
gear box until it locks.
2. Place the whisk in a vessel and only then,
press switch (B) to operate it.
For best results:
Use a wide vessel.
Only whip up to 400ml chilled cream
(min. 30% fat content, 4-8°C).
Only whip up to 4 egg whites.
Move the whisk clockwise.
How to operate your chopper attachment
The chopper is perfectly suited for chopping
meat, cheese, onions, herbs, garlic, carrots,
walnuts, almonds, prunes etc.
N.B.:
Do not chop extremely hard food, such as nut-
meg, coffee beans and grains.
ENGLISH
Vt-1456.qxd 17.11.04 10:03 Page 4