Yamato Scientific External output controller type Ⅳ CR - Manual (Page 3)

3. Caution in use
1. Be sure to turn off the breaker on connection.
2. Use either the time-up and the alarm output under the contact capacity.
3. Be careful not to short-circuit the temperature output terminal.
4. Be sure to connect the temperature output terminal to the recorder etc., with input
impedance of 100k Ω or more.
5. Fasten securely the screw attached to terminal for connection.
Table 1 Output of Each Machine Type
Type (series) Output （mV/ ℃）
DFS
DHS
DES
DTS
DP
DN
DS
SG
IN
IL700
5
FP 2
SM 10