Yamato Scientific BM200 Water Baths - Manual (Page 13)

11
5. Maintenance
Daily maintenance
Do not disjoint the unit
Never remodel the unit. There are some high-
voltage areas inside the unit, which could cause
electric shock. Request Yamato Scientific for
internal check, adjustment or repair.
For maintenance
For your safety, be sure to turn the power switch off (on the right side) and pull the power cord out
for maintenance. You must wait until the inside temperature of the unit goes down to normal.
Wipe off any or excess dirt on the packing and the operation panel with a soft dry cloth. Do not
use benzine, thinner or cleanser to wipe or scrub with a brush. This could cause change in shape,
quality and color.
When you do not use the unit for a long period of time, or
dispose of it
When the unit is not in use for a long period of time.
Turn the power switch off and pull the power cord out for safety, when the unit is not use for a
long period of time. Be sure to drain the tank.
When you dispose of the unit
Do not leave the unit in child playground etc., on disposal.
When you suspect “trouble”?
Situation Make Sure
The power lamp on the panel is not
lit when the power switch is on.
● If the power cord is connected firmly to an outlet
● If there is no power failure
● If the fuse blows
The temperature does not rise or is
different from the set value when
the power lamp is on.
●If the temperature setting knob is fixed tightly
If you have any question, contact Yamato Scientific.