Noise and vibration data, Vibration information – WORX WU651 300W vibrafree Rotary Sander 125mm 240V User Manual
Page 9
9
Noise and vibration data
WU651L
A weighted sound pressure
83dB(A)
K
pA
: 3dB(A)
A weighted sound power
94dB(A)
K
wA
: 3dB(A)
Wear ear protection when sound pressure is over
80dB(A)
WU651
A weighted sound pressure
81.2 dB(A)
K
pA
: 3dB(A)
A weighted sound power
92.2 dB(A)
K
wA
: 3dB(A)
Wear ear protection when sound pressure is over
80dB(A)
Vibration information
WU651L
Vibration total values (triax vector sum) determined according to
EN 60745:
Typical weighted vibration
Vibration emission value
a
h
= 5.52m/s
2
Uncertainty K = 1.5m/s²
•
•
•
•
•
•
•
•
•
•
WU651
Vibration total values (triax vector sum) determined according to
EN 60745:
Typical weighted vibration
Vibration emission value
a
h
= 9.35m/s
2
Uncertainty K = 1.5m/s²
Warning: The vibration emission value during actual use of
the power tool can differ from the declared value depending on the
ways in which the tool is used dependant on the following examples
and other variations on how the tool is used:
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp
and in good condition.
The tightness of the grip on the handles and any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
This tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in
the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is switched off