WORX WU651 300W vibrafree Rotary Sander 125mm 240V User Manual
Page 13
13
hose of a vacuum cleaner. First please turn on the vacuum cleaner,
and then turn on the sander. If you stop sanding, first turn off the
sander, then turn off your vacuum cleaner.
OPERATING THE SWITCH (See Fig F)
To start your sander, depress the protective cover over the switch
at the position marked“I”. To stop your sander, depress the
protective cover at the position marked “0”.
ORBITAL SANDING
Guide your sander parallel to the working surface and move it in
circles or in a cross pattern. Do not tilt the tool in order to avoid
deep unwanted sanding marks. The amount of material removed is
determined by the speed of the sanding disc and the grit size used.
The speed of the sanding disc diminishes relative to the pressure
applied to the tool. For faster removal, do not increase pressure on
the tool, but use a coarser grit size.
SELECTING THE RIGHT GRADE OF SANDPAPER
• Different grades of sanding paper can be purchased from good
DIY shops. Available grades are Coarse, Medium and Fine.
• Use coarse grits to sand down rough finishes, medium grit to
smooth the work and fine grit to finish off.
• The higher the grade number, the finer the grit. For rough work
4
5
6
F