WORX WU651 300W vibrafree Rotary Sander 125mm 240V - Manual (Page 6)

6
10
11
12
13
14
15
16
17
18
19
20
21
22
23
cables and pipes.
After long working periods external metal parts and accessories
could be hot.
If possible, ensure the work-piece is firmly clamped to prevent
movement.
Your sander is a hand held tool, do not clamp your sander.
Before sanding, check the area is free of nails, screws, etc.
Never stop the sander by applying a force to the base plate.
Only use paper in good condition. Do not use torn or worn paper.
Do not sand material containing asbestos due to a health risk.
Do not sand lead based paint due to the risk of lead poisoning.
Do not eat or drink in the working area of the sander.
Do not allow people to enter the working area without wearing a
dust mask.
Where possible, seal off the working area to contain the dust for
later removal.
Your tool is designed for dry sanding only, not wet sanding.
Your tool is designed for general purpose light polishing of wood
and metals.
Do not sand magnesium material due to the risk of fire.
Warning: Some dust particles created by power sanding,
contain chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:
Lead from lead-based paints.
Crystalline silica from bricks and cement and other masonry
products.
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending upon how often
you do this type of work.
To reduce your exposure to these chemicals:
Work in a well-ventilated area.
Work with approved safety equipment, such as those dust masks
that are specially designed to filter microscopic particles. •
•
•
•
•