WORX WU743 230mm 2000W Angle Grinder 240V - Manual (Page 9)

9
Technical data
Type WU736 WU736.1 WU737 737.1 WU743 WU743.1
WU743L WU745 WU745.1(700-749-designation of machinery,
representative of Angle grinder)
WU743L
WU736
WU736.1
WU737
WU737.1
WU743
WU743.1
WU745
WU745.1
Voltage 110V~50Hz 220-240V~50/60Hz
Power
input
2000W 2200W 2000W 2200W
Rated
speed
6600/min 8400/min 6600/min
Protection
class
/II
Spindle
thread
M14
Disc size 230mm 180mm 230mm
Disc bore 22.2mm
Machine
weight
4.5kg 4.7kg 4.5kg 4.7kg
Noise information
A weighted sound pressure L
pA
:94dB(A)
A weighted sound power L
wA
:105dB(A)
K
pA
&K
wA
3.0dB(A)
Wear ear protection when sound pressure is over 80dB(A)
•
•
•
•
•
•
•
•
Vibration Information
Vibration total values (triax vector sum) determined according to
EN 60745:
Typical weighted
vibration
Vibration emission value a
h
= 7.29m/s 2
Uncertainty K = 1.5m/s²
Warning: The vibration emission value during actual use of
the power tool can differ from the declared value depending on
the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp
and in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
This tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in
the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
•
•
•
•