WORX WU743 230mm 2000W Angle Grinder 240V - Manual (Page 11)

11
Operating instructions
Note: Before using the tool, read the instruction book carefully.
INTENDED USE
The machine is intended for cutting, roughing and brushing metal
and stone materials without using water.For cutting metal, a
special protection guard for cutting ( accessory) must be used.
Assembly and adjustment
MOUNTINg THE PROTECTIVE DEVICES
AUXILIARY HANDLE
For all work with the machine, the Auxiliary Handle (3) must
be mounted. Screw the Auxiliary Handle (3) into the head of the
machine according to the working method. (See Fig. A)
Warning! Do not make any alterations to the auxiliary
handle. Do not continue to use an auxiliary handle if it is
damaged.
MOUNTINg THE gRINDINg TOOLS
before any work on the machine itself, pull the mains plug.
grinding and cutting discs become very hot while working;
do not touch until they have cooled.
SPINDLE LOCK bUTTON
Clean the grinder spindle and all parts to be mounted. For clamping
and loosening the grinding tools, lock the grinder Spindle (7) with
the Spindle Lock Button (4).
1
1
A