beautypg.com

Technical data, Noise information, Vibration information – WORX WU370 18V 2.6 Ah Lithium Ion Cordless Hammer Drill User Manual

Page 7

background image

7

Technical data

Type Wu362 Wu370 Wu370.9(360-379-designation of
machinery, representative of Battery-powered drill)

Model no.

Wu362

Wu370 Wu370.9

Voltage

14.4V

18V

No load speed

0-400/0-1600/min

0-450/0-1650 /min

Impact rate

0-6400/

0-25600bpm

0-7200/

0-26400bpm

Number of clutch
positions

20+1+1

Max torque

50N.m

60N.m

Chuck capacity

13mm

13mm

Max.
drilling
capacity

Steel

13mm

13mm

Wood

38mm

38mm

Masonry

16mm

16mm

Machine weight

2.2kg

2.4kg

Noise information

A weighted sound pressure

L

pA

:94dB (A)

A weighted sound power

L

wA

:105dB (A)

K

PA

&K

WA

3.0dB (A)

Wear ear protection when sound pressure is over

80dB (A)




Vibration information

Vibration total values (triax vector sum) determined according to EN 60745:

Impact drilling into concrete

Vibration emission value a

h,ID

= 8.13m/s

2

Uncertainty K=1.5m/s²

Drilling into metal

Vibration emission value a

h,D

= 2.44m/s

2

Uncertainty K=1.5m/s²

Warning: The vibration emission value during actual use of the

power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.

this tool may cause hand-arm vibration syndrome if its use is not
adequately managed.

Warning: To be accurate, an estimation of exposure level in

the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.