WORX WU370 18V 2.6 Ah Lithium Ion Cordless Hammer Drill - Manual (Page 10)

10
Operation
auXiliaRy Handle (See fig.B)
Slide the handle onto the drill and rotate it to the desired working
position. To clamp the auxiliary handle, rotates the handgrip
clockwise. To loosen it, rotate the handgrip anti-clockwise. Always
use the handle during operation.
on/off SWitcH (See fig.c)
Depress the On/Off switch to start and release it to stop your drill.
The on/off switch is fitted with a brake function which stops your
chuck immediately when you quickly release the switch.
It is also a variable speed switch that delivers higher speed and
torque with increased trigger pressure. Speed is controlled by the
amount of switch trigger depression.
Warning: do not operate for long periods at low speed
because excess heat will be produced internally.
SWitcH lock (See fig.c)
The switch trigger can be locked in the OFF position. This helps to
reduce the possibility of accidental starting when not in use. To lock
the switch trigger, place the rotation control in the center position.
ReveRSiBle (See fig.c)
For drilling and screw driving use forward rotation marked “
”
(lever is moved to the left). Only use reverse rotation marked “ ”
(lever is moved to the right) to remove screws or release a jammed
drill bit.
Warning: never change the direction of rotation when the
chuck is rotating, wait until it has stopped!
1
2
3
4
C
D