WORX WU127 12V 1.3 Ah Lithium Ion Cordless Drill/ Driver User Manual
Page 12
12
aUtoMatic SPiNDle lock (See f)
The automatic spindle lock allows you to use it as a regular
screwdriver. You can give an extra twist to firmly tighten a screw,
loosen a very tight screw or continue working when the battery
energy has expired. For manual screwdriver purposes, the chuck is
automatically locked when the tool is off.
USiNG tHe leD liGHt
To turn on the light simply press the on/off switch. When you release
the on/off switch, the light will be off.
LED lighting increases visibility-great for dark or enclosed area. LED is
also a battery capacity indicator. It will flash when power gets low.
DRilliNG
When drilling into a hard smooth surface, use a center punch to mark
the desired hole location. This will prevent the drill bit from slipping
off center as the hole is started. Hold the tool firmly and place the tip
of the bit at the point to be drilled. Depress the switch trigger to start
the tool. Move the drill bit into the workpiece, applying only enough
pressure to keep the bit cutting. Do not force or apply side pressure
to elongate a hole.
tungsten carbide drill bits should always be used for
concrete and masonry. when drilling in metal, only use HSS
drill bits in good condition. always use a magnetic bit holder
(not included) when using short screwdriver bits. when screw-
driving, apply a small quantity of liquid soap or similar to the
screw threads to ease insertion.
7
8
9
A
B
C
D
E
F