beautypg.com

Operation – Wood’s Powr-Grip LL185 User Manual

Page 8

background image

Rev 2.0/6-09

6

LW185: #35040

OPERATION

B

EFORE

U

SING THE

L

ADDER

L

IFT

The operator must determine whether the Ladder Lift is capable of performing each intended

task, in accordance with the SPECIFICATIONS and INTENDED USE sections of this

INSTRUCTIONS

manual. In addition, the following preparations must be completed prior to

using the Ladder Lift.

Taking Safety Precautions

The operator must read and understand the ladder manufacturer's instructions for ladder use,

including all safe working practices.
The operator must also read and understand this

INSTRUCTIONS

manual, including all

WARNINGS

, before using the Ladder Lift. If necessary, contact Wood’s Powr-Grip or an

authorized dealer for assistance.

WARNING: Always wear appropriate personal protective equipment.

The operator must wear any personal protective equipment and take any other precautions

required to handle the load safely. Consult appropriate trade association guidelines to determine
what precautions are necessary for each type of load material.
The operator must perform all inspections and tests required by the I

NSPECTION

and T

ESTING

S

CHEDULES

(see MAINTENANCE).

T

O

A

TTACH A

L

OAD TO THE

L

ADDER

L

IFT

Before the operator attaches a load to the Ladder Lift, the load must be located directly beneath

the pulley unit. A good way to determine whether the load is centered under the pulley is to

winch the lifting hook up or down so that it hangs freely at a height just above the load. Move
the load so that it’s clearly centered beneath the hook. Never use the Ladder Lift to pull or drag
the load sideways, even if the distance seems insignificant.

WARNING: Never use Ladder Lift to pull or drag load sideways.

Once the load is centered, pull the locking pin from the restraining latch on the lifting hook.
Whether the load uses a solid bail, loop or chain, clip the load into the lifting hook and make sure

the restraining latch flips back into place to form a secure loop on the hook. Reinsert the pin into
the restraining latch to lock it into place.