Wood’s Powr-Grip LL185 - Manual (Page 4)

Rev 2.0/6-09 2 LW185: #35040
WARNINGS
Powr-Grip is pleased to offer the most reliable materials handling products
available. Despite the high degree of security provided by the Ladder Lift,
certain precautions must be observed to protect the operator and others.
Always wear personal protective equipment that is appropriate for the material being handled.
Follow trade association guidelines.
Always operate the Ladder Lift under conditions approved for its design (see INTENDED USE:
O
PERATING
E
NVIRONMENT
).
Never operate a Ladder Lift that is damaged, malfunctioning, or missing parts.
Never remove or obscure warning labels.
Never operate a Ladder Lift if the Maximum Load Capacity or any warning appears to be missing
or obscured.
Never exceed the Maximum Load Capacity or attempt to lift loads the Ladder Lift is not designed
for (see INTENDED USE: L
OAD
C
HARACTERISTICS
).
Never allow people to sit or stand on any components of the Ladder Lift, the ladder or the load
being lifted.
Never lift a load higher than necessary or leave suspended loads unattended.
Never lift a load over people.
Always use the locking pin to secure the restraining latch on the lifting hook before lifting a load
(see OPERATION: T
O
A
TTACH A
L
OAD TO THE
L
ADDER
L
IFT
).
Always keep other personnel far enough away from the Ladder Lift to avoid injury in the event
of an unexpected load release.
Always remember that modifications to the Ladder Lift may compromise its safety. Wood’s
Powr-Grip cannot be responsible for the safety of a Ladder Lift that has been modified by the
customer. For consultation, contact Wood's Powr-Grip.
Never use the Ladder Lift near power transmission lines. It conducts electricity.