Replacement parts list – Wood’s Powr-Grip LL185 User Manual
Page 13

Rev 2.0/6-09
11
LW185: #35040
Care and Storage of Wire Rope
Wire rope may look like a simple, single part, but it is really a machine with many moving parts,
requiring as much care and maintenance as gears and chains. Rope should be stored to prevent
damage, deterioration and corrosion. Place the Ladder Lift in a dry location, and cover it to
prevent dirt, water or other contaminants from damaging the rope. It is also important to apply
lubricant on a regular basis, to reduce internal friction and prevent corrosion.
When the rope is in use, care should be taken to prevent the ground or other objects from
scraping, nicking, crushing or inducing sharp bends in the rope. Also, the rope should never be
dragged on the ground, especially through dirt, mud or water.
W
INCH
M
AINTENANCE
Refer to the
maintenance of the hand winch.
P
ULLEY
M
AINTENANCE
The pulley of the Ladder Lift must be kept lubricated and periodically inspected for damage, but
otherwise requires very little maintenance. If at any time the pulley becomes cracked, chipped,
dented or otherwise damaged, replace it immediately. Operating with a damaged pulley puts it
at risk of failing or possibly causing a jam that cannot be cleared. A damaged pulley can also
damage the wire rope, reducing its service life or requiring it to be replaced.
L
ADDER
M
AINTENANCE
Refer to the ladder manufacturer’s instructions about ladder inspection, testing and maintenance.
REPLACEMENT PARTS LIST
Stock No.
Description
Qty.
66472MM
Hand Winch w/Automatic Brake - 800 lbs [362 kg] Capacity
1
66413
Nylon Sheave w/Hub for 5/32" [4 mm] Wire Rope - 800 lbs [362 kg] Capacity
1
59660AM
5/32" [4 mm] Wire Rope Assembly
1
49110
End Plug - 2" x 2" x 3/16" [50.8 mm x 50.8 mm x 4.8 mm] Tubing Size
8
13520
Cotterless Hitch Pin - 3/8" x 3" [10 mm x 76 mm]
4
13220
Hairpin Cotter Pin
1
SERVICE ONLY WITH IDENTICAL REPLACEMENT PARTS
SUPPLIED BY OR APPROVED BY WOOD'S POWR-GRIP CO., INC.