Wintec PCI Wireless-N - Manual (Page 39)

FileMate Wireless-N PCI Adapter
Items
Information
TX OK
Successfully transmitted frames numbers.
TX Error
Frames numbers transmitting with errors.
RX OK
Successfully received frames numbers.
Rx Packet Count
Packets of receiving frames
RX Retry
Frames numbers re-receiving
RX ICV Error
Integrity Check Value receiving with error.
Reset Counter
Reset counters to zero.
4.2.8 Wi-Fi Protect Setup
The primary goal of Wi-Fi Protected Setup (Wi-Fi Simple Configuration) is to simplify the security
setup and management of Wi-Fi networks. This adapter supports the configuration setup using PIN
configuration method or PBC configuration method. If the wireless card supports Wi-Fi Protected
Setup (WPS), you can establish a wireless connection between wireless card and router using
either Push Button Configuration (PBC) method or PIN method.
Here we will introduce two ways to configure the QSS
(QSS is known as rapid security settings, by pressing the wireless router and wireless card on the
QSS button to automatically set up WPA2 secure connection level without the router or network
adapter management software to conduct the cumbersome interface settings, greatly simplifying
the operation of the wireless security settings.)
Pin Code: 8-digit numbers. It is randomly generated from system
1. PIN method
Click the button “Pin Input Config (PIN)”, and then come to the following figure.
Click the button “Yes”, you can select one of the AP.
- 39 -