Wintec FileMate ExpressCard with Mini USB 2.0 - Manual

1. Attach the Mini USB 2.0 cable to the SSD.
2. Plug the other end of the USB 2.0 cable into your desired device.
Installation for Mini USB 2.0 Connector
1. Remove the covering on the Wintec Filemate ExpressCard and the ExpressCard slot.
2. Disconnect any USB cables from the Wintec Filemate ExpressCard.
3. Insert the Wintec Filemate ExpressCard into ExpressCard slot. Ensure that it is inserted all the way for
a complete connection.
Installation for ExpressCard Slot
Note:
If the ExpressCard is not properly detected in Windows, Please download the latest driver from the Wintec support website:
www.wintecind.com/support/index_downloads.htm
www.wintecind.com
ExpressCard with Mini USB 2.0 SSD
TM
Installation Guide
89200977