6 status, Filemate wireless-n pci adapter – Wintec PCI Wireless-N User Manual
Page 22
FileMate Wireless-N PCI Adapter
1. Preamble Mode
The length of CRC blocks in the frames during the wireless communication. Select the options from
the drop list : (1) Long (2)Short (3)Auto.
2. Channel Plan
The selected Country: FCC, IC, ETSI, Spain, France, MKK, MKK1, Israel, TELEC, Default
3. Threshold
(1) Fragment Threshold
This value should remain at its default setting of 2347. If you experience a high packet error rate,
you may slightly increase your fragmentation threshold within the value range of 256 to 2432.
Setting the fragmentation threshold too low may result in poor performance.
(2) RTS Threshold
Request To Send threshold. This value should remain at its default setting of 2346. If you encounter
inconsistent data flow, only minor modifications to the value range between 0 and 2432 are
recommended.
3.2.6 Status
The Status tab contains general information about the program and its operations. The current
Status tab does not require any configurations.
- 22 -