Brookstone Photo Printer - Manual (Page 20)

CLEANING THE OUTER CASING
Please follow the instructions below to clean the outer casing of the scanner
when necessary .
1 . Use a suitable dust blower to blow off the dust on the scanner .
2 . Use a slightly damp cloth to wipe off any smears on the surface of the scanner .
3 . Wipe the scanner with a dry, clean, lint-free cloth .
WARNING: Do not use any solvents or corrosive liquid (for example; alcohol,
kerosene, etc.) to clean any part of the scanner. Otherwise, the plastic
material will be permanently damaged.
CLEANING THE IMAGE SENSOR
1 . Follow the instructions above to clean the outer casing of the scanner first .
2 . With the scanner power off and disconnected from the power supply,
insert the sensor cleaning swab into one end of the output slot .
NOTE: Make sure that there is no visible dust on the swab before
inserting it into the output slot.
3 . gently slide the sensor cleaning swab to the other end of the output slot .
4 . Repeat step 3 five or six times consecutively .
NOTE: Do not apply too much force on the swab.
5 . Slide the sensor cleaning swab to the left end of the output slot, and then
remove it from the slot .
6 . Store the sensor cleaning swab in a safe place and keep it away from dust .
19