Power/activity led, Usb 3.0 interface, Kensington® security slot – Western Digital My Book User Manual User Manual
Page 9: Registering your drive, Kensington, Security slot

MY BOOK
USER MANUAL
ABOUT YOUR WD DRIVE
– 4
Power/Activity LED
The power/activity LED shows the drive’s power state as follows:
USB 3.0 Interface
USB 3.0 supports data transfer rates up to 5 Gb/s. USB 3.0 is backward compatible
with USB 2.0. Connection to a USB 2.0 port transfers data at the port speed—up to
480 Mb/s
Kensington
®
Security Slot
For drive security, the Kensington security slot accepts a standard Kensington security
cable (sold separately). For more information about the Kensington security slot and
available products, visit
.
Registering Your Drive
Always register your My Book drive to get the latest updates and special offers. You can
easily register your drive using the WD Drive Utilities software, as described in
“Registering the Drive” on page 55. Another way is to register online at
Figure 2. My Book Drive
LED Appearance
Power State/Activity
On steady
Idle
Fast flashing, approximately 3 times per second
Activity
Slow flashing, approximately every 2.5 seconds
System standby
Power/Activity LED
Security Slot
USB 3.0
Power Connector