Western Digital WD TV Mini Media Player User Manual - Manual (Page 18)

WD TV Mini Media Player
User Manual
GETTING STARTED – 14
If powering on the device for the first time, the following screen will appear:
5. Use the UP/DOWN navigation buttons on the remote control to select
Component (YPbPr).
Note: This screen will switch between Component and Composite every 10 seconds until you make a selection.
6. Press the ENTER button to confirm the video output setting.
After selecting your video resolution output option, see “Using the WD TV Mini
Media Player Menu” on page 19.
Toslink (optical) Digital Audio
Toslink (optical) digital can send digital audio to a receiver capable of decoding multi-
channel audio through an AV receiver.
1. Complete the composite or component video connection as described on
page 13.
2. Plug a Toslink (optical) cable into the S/PDIF digital optical port on your media
player.
3. Plug the other end of the Toslink (optical) cable into the digital optical port on your
AV receiver.