Western Digital My Book World Edition (white light) Quick Install Guide - Manual (Page 4)

My Book World Edition | 3
System View
Step 1: Connect My Book World Edition to the Network
1. Connect one end of the Ethernet cable into the Ethernet port on the back of the My Book device.
2. Connect the other end of the Ethernet cable directly into a LAN port in a router or network switch.
3. Connect the end of the adapter into the DC power supply socket located on the back of the
My Book device.
4. Plug the AC adapter into a power outlet. The My Book device powers up automatically .
Important: Wait for the My Book device to finish powering up (approximately three minutes) before
configuring the device. During this time, do not press the power button. The bottom LED on the front
of the My Book device fully illuminates.
Power button
USB port (for expansion only)
Reset button
LED
Ethernet port
Kensington ® Security Slot
1
2
3
4