WarmlyYours TH115-AF-GA - Manual (Page 14)

Owner’s Guide
12
ENG
LISH
WARNING: To avoid damaging your floor, follow your floor supplier’s recommendations regarding floor
temperature limits.
The minimum and maximum floor temperature limits are 41°F (5.0°C) and 82°F (28.0°C) by default. To
modify these limits, proceed as follows:
n
Switch the thermostat to Off.
o
Press and hold the button.
p
Switch the thermostat back to On.
q
Release the button when the minimum temperature limit (FL:LO) appears.
r
Set the minimum temperature limit using the buttons.
s
Press the button to display the maximum temperature limit (FL:HI).
t
Set the maximum temperature limit using the buttons.
u
Press Mode/Ret to return the thermostat to normal display.
NOTE: The thermostat will automatically return to normal display if no button is pressed for
60 seconds.
Floor temperature limits (AF mode only)
400-115-059-A (WarmlyYours TH115-AF-GA-08) 5 x 3.125 EFS.book Page 12 Friday, January 22, 2010 9:48 AM