Waring Pro FS1000 - Manual (Page 11)

10
13. Using one hand, rotate the front part of the blade
sharpener upward, and with the other hand turn
the thickness control knob clockwise until the
blade sharpener is in front of the blade.
14. Plug the cord into the power outlet.
15. Remove your hands and turn the machine to the
ON position.
16. Adjust the thickness control knob and turn it
slowly until the sharpening stone slightly touches
the front of the blade.
17. Maintain a light contact for only 5–6 seconds to
remove the burr.
18. Remove the sharpening stone from the edge and
stop the machine.
19. The second step of sharpening has been
completed. cAUTION: Blade is very sharp.
20. Unplug power cord for safety. Remove the
blade sharpener.
Sharpener