Vortex Optics RAZOR HD 16-48X65 SPOTTING SCOPE - Manual (Page 6)

- 11 - - 10 -
spotting scopes
C
ARE AND
H
ANDLING
T
IPS
Keep lenses clean
Keep your Razor HD spotting scope in its protective padded case while viewing. If
your spotting scope gets wet, be sure to dry it out thoroughly before packing it away.
For long-term storage, choose a dark, well-ventilated place.
For the best viewing, regularly clean the exterior lenses:
Note: *Never use facial tissue, heavy cotton, or flannel fabric—these materials can scratch the
surface of a lens. Use lens cleaning fluid and an optical tissue or cloth to clean lenses.
• Remove any dust or grit from the lens before wiping. Use a can of pressurized air,
soft camel hair brush or an acrylic optical brush.
• Clear lenses of smudges, fingerprints or eyelash oil. Fog the lens with your
breath, then use a non-abrasive lens cloth* to clean the lens.
T
HE
VIP W
ARRANTY
We build optics based on our commitment to your absolute satisfaction. That’s why Vortex
products are unconditionally guaranteed and we make this Very Important Promise to
you—a Very Important Person.
Rest assured that in the event your Razor HD becomes damaged
or defective, Vortex Optics will repair or replace the scope at no
charge to you. Call Vortex Optics at 800-426-0048 for prompt,
professional, and friendly service.
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
[email protected]
Visit www.vortexoptics.com for more information. Canadian customers may visit
www.vortexcanada.net for customer service information.
Note: The VIP warranty does not cover theft, loss, or deliberate damage to the product.