Vortex Optics RANGER 1000 RANGEFINDER WITH HCD - Manual (Page 8)

600
Yar
d Line of Sight
Scan Feature
The Scan feature can be used to range moving targets or help
range smaller targets on uniform backgrounds in either HCD
or LOS modes. Once powered up, press and hold the Measure
button and scan laser back and forth, watching for changes in the
yardage number as crosshairs move across the target object. A
blinking crosshair indicates Scan Ranging is activated.
14 15
Using the INC
LOS/INC Drop Data Adjustment Technique Example
You have a shot at a ram on a ledge. In LOS mode, you range him
at 600 yards with an INC reading of 93 (22 degree slope). You
know the bullet in your .300 WinMag cartridge will drop 10 MOA
at 600 yards on level ground. To compensate for this angled shot,
use the formula below or consult your Field Reference Card.
Example:
10 MOA x 93% (.93) = 9 1/4 MOA
To make this angled 600 yard shot, use a drop adjust of 9 1/4 MOA.
Scanning to get range:
Scan back and forth, watching for yardage to display.