beautypg.com

Vortex Optics RANGER 1000 RANGEFINDER WITH HCD User Manual

Page 2

background image

2

3

2

3

Loop Lanyard
through Attachment
Sockets

Measure Button

Adjust
Focus with
Eyecup

Battery
Compartment

Utility Clip
(Attaches to Either Side)

Menu Button

B

ASIC

O

PERATION

Install Battery

Open the battery
compartment and
install the CR2 battery
included with the
Ranger 1000.

Power Up

With the battery installed, the Ranger 1000 is in a Ready
Condition—the normal power-off condition when not ranging. To
power up the Ranger 1000 from Ready Condition
and prepare for ranging, press and release the
Measure button. The HCD or LOS ranging
screen will display. The Ranger 1000 will power
down automatically after ten seconds of non-use.

Turn the eyecup in or out until image is sharp.

Tripod
Socket

Battery

Power Indicator

Remove battery
compartment cover.

Install battery with
positive side facing
outwards.

+

Focus