Vortex Optics VMX-3T MAGNIFIER - Manual (Page 6)

3X MAGNIFIER
VMX-3T TM
11 10
M
AINTENANCE
All components of the VMX-3T are permanently lubricated, so no
additional lubricant should be applied.
Lubrication
If possible, avoid long term storage of the VMX-3T exposed to
direct sunlight or any very hot location. Over time, prolonged high
temperatures can adversely affect internal lubricants.
Storage
Keep lenses clean
For the best viewing, regularly clean the exterior lenses:
• Remove any dust or grit from the lens before wiping. Use a
can of pressurized air, soft camel hair brush or an acrylic optical
brush.
• Clear lenses of smudges, fingerprints or eyelash oil. Fog the
lens with your breath, then use a non-abrasive lens cloth* to
clean the lens.
T
HE
VIP W
ARRANTY
We build optics based on our commitment to your absolute
satisfaction. That’s why Vortex products are unconditionally
guaranteed and we make this Very Important
Promise to you—a Very Important Person.
Rest assured that in the event your VMX-3T
becomes damaged or defective, Vortex Optics will
repair or replace the scope at no charge to you. Call Vortex Optics
at 800-426-0048 for prompt, professional, and friendly service.
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
[email protected]
Visit www.vortexoptics.com for more information. Canadian
customers may visit www.vortexcanada.net for customer service
information.
Note: Do not attempt to disassemble any components. The VIP warranty
does not cover theft, loss, or deliberate damage to the product.
Note: * Never use facial tissue, heavy cotton, or flannel fabric—these
materials can scratch the surface of a lens. Use lens cleaning fluid and
optical tissue or cloth to clean lenses.