Vortex Optics VMX-3T MAGNIFIER - Manual (Page 3)

3X MAGNIFIER
VMX-3T TM
M
OUNTING THE
VMX-3T M
AGNIFIER
Using the included screws, attach theVMX-3T magnifier to the
Flip Mount. Ocular lens and Release Button should face shooter.
Mount height options
With the included flip mount and shim, there are two options for
mounting the VMX-3T:
Absolute Co-Witness Height with Flip Mount
Lower 1/3 Co-Witness Height with Flip Mount and Shim Plate
Positions the VMX-3T at 37 mm from the base surface to the center
of the optic. This puts the dot height at a center (absolute) sight
picture when co-witnessed with standard AR-15 iron sights. For this
height, do not install the included shim plate.
Positions the VMX-3T at 40 mm from the base surface to the
center of the optic. This puts the dot height at a lower 1/3 sight
picture when co-witnessed with standard AR-15 iron sights. For
this height, install the included shim plate between the VMX-3T
and the Flip Mount.
Attach VMX-3T to Flip Mount
Flip Mount
Shim Plate
Ocular Lens
Release Button
Objective
Lens Dot-Centering
Screw (Elevation)
Dot-Centering
Screw (Windage)
Mounting Screws
Tighten to 20 in/lbs.
Focus Dial
VMX-3T with Flip Mount
For a lower 1/3 co-witness
height, attach the shim plate
between the flip mount and the
VMX-3T.
5 4