Vigo VG3219A - Manual (Page 4)

6. Loosely attach mounting brackets to the countertop, parallel to
the cutout opening using the supplied mounting screws and
nuts. Mounting screws with brass inserts are supplied with the
sink, however, countertop material vary and the correct type of
fasteners should be recommended by your installer or supplier.
7. Clean sink flange and underside of cutout area of countertop,
making sure that the area is smooth and free of grease. MUST
use 100% silicone for this installation. Apply continuous bead
of silicone caulk evenly on top of sink flange. (FIGURE 4)
NEVER perform this procedure outdoor and under sunlight.
If performed under an extremely hot and dry climate, the
caulking of the sink frame should be performed by two
people at the same time.
8. Position and align sink over the countertop opening and press
sink onto countertop. Turn bent end of mounting bracket to
snug over the sink rim.
9. Check alignment of sink again and tighten fasteners to secure
sink. (FIGURE 5)
10. Wipe away excess silicone caulk with damp cloth. Connect
drain and water supply according to manufacturer's instruction.
Figure 4
Figure 5
4