Boston Acoustics TSU501 - Manual (Page 28)

SETUP AND USE GUIDE 26
When the Avidea Remote does not receive an IR code in 5 seconds:
• You will hear an error beep.
• The label changes from Learning to Failed. The Learn sequence has failed.
• The Avidea Remote will return to Learn mode. Return to step 5 of the
Learn sequence to relearn the button.
7 Go to other pages of the selected Device with the Page Up and Page
Down buttons. Repeat steps 5 and 6 until you have copied all the
commands of the existing remote control.
8 Press Done when you have finished learning commands to the buttons of
your choice.
The Avidea Remote returns to Use Mode. You can try out the new IR
codes or select another Device to learn.
Labeling Buttons and Devices
You can label or relabel buttons and Devices with:
• Characters in lower case and upper case
• Numbers
• Symbols
To label a Device:
1 Go the Device Page.
2 Press and hold the Mode button for 3 seconds.
The Mode screen appears.
USING THE AVIDEA REMOTE