beautypg.com

Using the avidea remote, Working with modes – Boston Acoustics TSU501 User Manual

Page 15

background image

USING THE AVIDEA REMOTE

SETUP AND USE GUIDE

13

Working with Modes

Operation of the Avidea System or connected Devices requires that the remote
be in Use mode. For customizing the Avidea Remote (adjusting the settings,
entering codes, learning and labeling buttons, or recording macros) requires
switching to the appropriate mode.

The Avidea Remote can be put into 7 different modes. These modes are:

Use mode

The normal mode for operating your Avidea System and all
the connected Devices. See ‘Operating Devices’ on p. 9.

Setup mode

For changing the Avidea Remote settings.
See ‘Adjusting the Settings’ on p. 14.

Brand mode

For entering the codes for the brands of your Devices using
the Avidea Remote’s library. See ‘Entering Codes for Other
Devices' on p. 21.

Learn mode

For learning commands from other remote controls. See
‘Learning Commands’ on p. 24.

Label mode

For re-labeling buttons and re-naming Devices on the Avidea
Remote. See ‘Labeling Buttons and Devices’ on p. 26.

Macro mode For recording macros. You can assign multiple commands to

one single button. See ‘Recording Macros’ on p. 28.

RF/IR mode

For changing mode of communication to connected Devices.
You can control other Devices (VCR, satellite receiver) from
greater distances. See ‘Changing the RF/IR settings’ on p. 18.

Note

For learning commands, entering codes, and recording macros, it is necessary

to select a Device on the Device Page. (See below.)

1 On the Device Page tap the soft button of

the Device you want to customize.
The first page of the selected Device appears.

2 Press and hold the

Mode button for 3 seconds.

The Mode screen appears.

Note

You have to press and hold the Mode button for

3 seconds to prevent accidental changes.