Vigo VGR3218BL - Manual (Page 3)

Installation Instructions
Please carefully read complete instructions before beginning installation. Only a professional stone
fabricator is qualified to perform this installation.
Note: These instructions are for installation with solid surface, composite material countertops. Vigo
recommends professional countertop installers and is not responsible for damage to the countertop or
sink during installation.
Do not cut the sink opening with traditional saw cut method.
1. Unpack the new sink and check the contents of the materials supplied: Sink, Mounting brackets,
and Cutout template (depending on model). Contact your retailer if any product is damaged or
missing prior to installation. Never install a damaged sink as it can void your warranty.
2. Supplied cutout template provides two options of installation:
A. Flush mount: Sink edge is flush with countertop opening. (FIGURE 1)
B. Reveal mount: Sink rim is exposed approximately 1/4" from the edge of countertop opening.
(FIGURE 2)
Figure 1 Figure 2
3. Cut out the appropriate template for your sink model and desired installation option. Place template
in desired position on countertop, locating center of the bowl over cabinet and faucet holes.
4. Trace the outline of the template and cut countertop along the inside of the line using appropriate
cutting tools. Template is for guide only. Use physical sink to ensure accurate cutout opening.
3
5. Locate the drill holes on the underside of the countertop,
approximately 1" from edge of the sink to be installed.
Holes should be evenly spaced approximately 6" to 8"
apart starting from every corner as shown in Figure 3. It is
recommended to install a faucet at this point before
installing the sink.
Figure 3
!
Countertop
Silicone Caulk
(Not furnished)
Sink Mounting
Bracket
Fastener
Countertop
Silicone Caulk
(Not furnished)
Sink
Mounting
Bracket
Fastener