Victorio VKP1011 Apple Peeler - Manual (Page 5)

3
Align, adjust and secure blades:
Before using the peeler, it is critical that the
blades are properly aligned, adjusted and
secured. Misaligned or unsecured blades will
damage the peeler. You may see a video of
the following at http://victorio.info/apple-
peeler-video.html
Align the coring blade:
Align the coring/slicing blade. The fork
should be able to pass through the center of
the blade without touching the sides. The
correct alignment is shown to the right. The
blade MUST be tightened firmly so it will
not move out of alignment during opera-
tion. * Use caution when adjusting,
blade is sharp!
Test alignment:
Test blade alignment by
pressing down on the
release lever. While hold-
ing the release lever down
move the shaft forwards
and backwards and watch
the fork as it is passing
through the center of the
coring blade. Observe
carefully to make sure the
fork doesn’t touch the sides of the coring blade.