UVP EL Series - Manual (Page 5)

EL Series UV Lamps Page 5
Service Procedures
Return Procedure
A Returned Goods Authorization (RGA) number must be obtained from UVP Customer Service
before returning any product to UVP.
Cleaning and Care
Clean unit surface with a damp soft cloth or sponge. Never use abrasive cleaners (can damage the UV
filter surface).
Replacing Tubes
Disconnect the lamp from the electrical supply before replacing tubes.
Remove the two Phillips Head screws located in the end cap.
Grasp the extruded housing and slide the chassis and filter out together away from the switch.
Disconnect the interior Molex Connector (Fig. 1) and slide the chassis and filter out from the
housing completely.
Once out of the extrusion, the chassis and filter will come apart.