Quick start install guide – Undercover D-Ring Hinge Version User Manual

Page 3

QUICK START INSTALL GUIDE

Hidden Hinge Version

PAGE 3

For C

ust

omer S

vic

e or W

arr

ant

y Issues

, C

ontac

t UnderC

er D

ire

ctl

y (866) 900-8800 w

.under

verinfo

4.1

Install Cover (continued)

Final Adjustment

Adjust the lock strikes

up or down accord-

ingly. With the

tailgate down adjust

the lock strike to have

approximately 1/8”

gap between the lock

and the lock strike.

With the tailgate up

you should be able to

turn the lock with out

any resistance.

Further adjustment

may be needed to

achieve this.

Be sure the front

flap hangs over the

bulkhead of the

truck.

Install the hydraulic

struts, attach the

large end to the

cover and the rod

end to the rear

mounting bracket

(these will snap into

place, no tools

needed).

UNDERCOVER TONNEAU

CORRECT

PLACEMENT OF

FRONT FLAP

HANGS OVER BULKHEAD

INCORRECT

PLACEMENT

OF FRONT FLAP

TRUCK BULKHEAD

LOCK

LOCK STRIKE

REAR BRACKET

TRUCK BED RAIL

LOCK CAM

With your cover closed, take a quick inspection to make sure that it is not

touching the bed on either side or the tailgate. The desirable gap is no

less than 1/8” and no more than 1/4”.

To adjust the cover front to back evenly, move both of the front brackets

forward or rearward accordingly. To adjust to one side or the other, move

the front brackets forward or rearward independently.

HYDRAULIC STRUT

(LARGE END)

ATTACHES TO COVER

REAR BRACKET

PASSENGER SIDE

(ROD END)