Setup guide (cont.) – Bushnell 119907 User Manual
Page 13
1
Setup Guide (cont.)
4. K3 (Model 119835) – (Hi/Med/Lo) RESOLUTION:
K4 (Model 119937/119907)– (Hi/Med/Lo) RESOLUTION:
5. K4 (Model 119835)– (30s/1Min/2Min) CAMERA DELAY MODE
K5 (Model 119937/119907) – (30s/1Min/2Min) CAMERA DELAY MODE:
There are three modes for taking delayed pictures: 30 Sec, 1 Min and 2 Min.
The unit will record EVENtS while CAMERA is in DELAY MODE each time the PiR senses motion.
(a) 30s: After the first picture, a second picture will be taken 30 seconds later.
(b) 1Min: After the first picture, a second picture will be taken 1 minute later.
(c) 2Min: After the first picture, a second picture will be taken 2 minutes later.
The trail Scout has three still photo resolution options:
(a) Hi: Still photos are taken at the highest (interpolated) resolution setting, 5MP (119835) or 7MP
(119937/119907). Use this setting if you plan to make large prints from your photos, or anytime photo
quality is a higher priority than photo storage space (higher resolution photos generate larger size
files).
(b) Med: Still photos are taken at the actual sensor resolution, 3MP (119835) or 5MP (119937/119907).
This is a good general purpose setting, as it is an ideal compromise between quality and storage space
(c) Lo: Still photos are taken at a lower resolution setting, 2MP (119835) or 3MP (119937/119907).
Use this setting if your priority is being able to store more photos on an SD card, and/or if you will only
be viewing your photos on a computer monitor or making small prints.
Trail Scout 2008 Models 119835+113 13
3/4/08 12:05:28 AM